Structural Drying and Dehumidification in Marietta
Once the standing water is gone, the job is drying what is left inside the structure: drywall, studs, subfloor, hardwood, concrete. That is done with measured airflow and dehumidification over several days, with readings to prove when it is finished.
Until the line opens, email info@mariettawaterdamagega.com and say what happened and where.
Last updated November 16, 2026
How drying works
Water leaves materials by evaporating into the air. Air movers keep air flowing across wet surfaces so evaporation keeps going; dehumidifiers pull that moisture out of the air so it does not just settle back into the house. Restoration companies set up a closed drying area, block off HVAC if needed, and adjust the equipment as readings change.
What gets measured
- Material moisture with pin and pinless meters, compared with dry readings from an unaffected area of the same house.
- Air temperature and humidity inside the drying area and outside it.
- Hidden moisture with thermal imaging, used to guide where to take meter readings.
The drying log
A good company records readings every day in the same spots and stops when materials reach the dry standard. That log is also what your insurer will want to see.
Drying in place vs. removing
Drywall soaked by clean water can often be dried by drilling small holes behind the baseboard and blowing air into the cavity. Hardwood can be dried with mat systems that pull moisture up through the boards. Material that was soaked by contaminated water, that has swollen, or that is not drying is removed instead.
Humidity in Marietta summers
Georgia summers are humid, which slows drying if the house is opened up. Restoration crews usually keep windows closed and let the dehumidifiers do the work. Until our phone line opens, email info@mariettawaterdamagega.com while the phone line is being set up.
Equipment you will see
- Air movers aimed along walls and under cabinets to keep air moving across wet surfaces.
- Low-grain refrigerant or desiccant dehumidifiers sized to the room and the amount of water.
- Hardwood floor mats that pull moisture up through the boards.
- Wall cavity injectors that push dry air into walls through small holes.
- Air scrubbers when dust, mold or contamination is a concern.
Who checks it is dry
The restoration company should take readings in the same places every day and compare them with a dry reference point in an unaffected room. Ask to see the log. Repairs such as new drywall or flooring should not start until the readings show the structure is dry.
Marietta homeowners ask
How long does structural drying take?
Often three to five days for clean water caught early, longer for hardwood, plaster, concrete or a large finished basement. Daily readings show the progress.
Can I turn the equipment off at night?
Ideally, no. Drying works by keeping air moving and humidity low continuously. If the noise or heat is a problem, ask the technician what can be adjusted.
Why does the house feel warm?
Dehumidifiers release heat as they pull water out of the air, and warmer air holds more moisture, which speeds drying. The technician balances temperature and humidity.
Sources
Ready when you are
Dry is a number on a meter, not a feeling. Ask for the daily readings.
- A local company measures the moisture before anything is torn out
- You get the scope and the price directly from that company
- Our referral is free; the contractor is independent
Until it opens, email info@mariettawaterdamagega.com.